Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 116 / 148

100 Chapter 4—Hardware and Maintenance Repairs
3. Push the memory module gently downward until the locking clips click into
position. See Figure 7 on page 99.
Figure 8: Memory module and locking clip seat
Preparing the FusionIN Board
1. Touch the sides of the new board’s antistatic packet to an unpainted area of the
server chassis, and then remove the new board from the packet.
2. Place the board, component-side up, on a flat, antistatic surface.
Installing the FusionIN Board
1. Carefully grasp the board by its top edge or upper corners, and align it with the
expansion slot (PCIX-133) on the system board.
2. Press the board firmly into the expansion slot. Verify that the board fits securely
in the expansion slot and is locked in position.
3. If you have other options to remove or replace, do so now.
4. Insert the hexagonal screw that holds the board at the rear of the server and
tighten it.
5. Return the side cover. See Returning the Side Cover on page 94.
6. Reconnect all external cables and power cords, and turn on the server.
Locking clip seat.
Note:
When replacing FusionIN board memory modules, verify that you are using
the same memory size and type. See
Spare Parts List on page 91.
The FusionIN board memory modules are exclusive to the IC-304 print
controller and are not interchangeable with any other memory modules.
WARNING: Avoid touching the components and gold-plated connectors
on the adapter.
Attention:
When you replace a board in the server, ensure that it is
completely and correctly seated in the system board expansion slot before
applying power. Incorrect seating might cause damage to the system
board or any other board.