Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 140 / 148

124 Chapter 4—Hardware and Maintenance Repairs
7. Remove the four screws that secure the fan to the rear-fan bracket. See
Figure 39 on page 124.
Figure 39: Rear fan
4.10.2 Installing the Rear Fan
1. Align the four holes in the new fan with the matching holes in the
rear-fan bracket, then insert the four screws and tighten.
2. Place the rear fan in position at the rear of the server.
3. Guide the two locking tabs through the top of the slots, while aligning the other
four tabs with their respective slots.
4. Press the rear-fan bracket against the rear of the server, until all the tabs are in
their slots, then move the rear-fan bracket downward until it locks into position.
5. Reconnect the fan cable to the system board.
6. Return the side cover. See Returning the Side Cover on page 94.
7. Reconnect all external cables and power cords, and turn on the server.