Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 44 / 148

28 Chapter 1—First Time Setup and Configuration
1.8 Setting Up the Disk Wipe Utility
The Disk Wipe utility is recommended for high security customers. Usually when
you delete a file, the file’s dictionary entry is removed but data still remains on the
disk. The Disk Wipe utility enables you to clear previously deleted files. It eliminates
the contents of your deleted files by scanning all of the empty sectors on the disk
and replacing them with zeros or other characters. Sectors that are not empty are
left untouched. This option enables you to work in a more secure environment.
To use the IC-304 Print Controller Disk Wipe utility:
1. There are two methods for accessing the Disk Wipe utility:
a. Quit the IC-304 print controller software.
On shutdown, the Disk Wipe window appears.
b. From the Windows Start menu, select IC-304 > IC-304 Tools > DiskWipe.
2. Click Start Wiping .
A progress bar appears while Disk Wipe permanently deletes the files.
3. When the message Disk wiping was completed successfully appears,
click Exit .
Note: The Disk Wipe utility runs automatically only after you shut down the
IC-304 print controller.
Note:
The Disk Wipe utility does not function well with Symantec Norton
Utilities™ technology installed on your computer. Therefore, before
activating the IC-304 print controller Disk Wipe utility, ensure that Norton
Utilities is not installed on the IC-304 print controller.
The Disk Wipe utility affects the user and printer disks.
Do not operate the Disk Wipe utility while another application is running.
In rare cases when the process of deleting files from the Storage window
was interrupted, parts of the deleted files may still reside in the
D\:Output
folder. Therefore, check the D\:Output folder where you start Disk Wipe to
ensure that all the relevant files were deleted.
Disk Wipe may take a while to complete. Make sure the completion
message appears before you close or abort the software.