Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 50 / 148

34 Chapter 2—Reinstalling the IC-304 Print Controller Software
6. Press any key to continue.
You have completed backing up the job list database.
2.2.2 Restoring the IC-304 Print Controller System Partition
The IC-304 print controller enables you to restore partition C or the entire system
(partitions C and D ).
Performing the restore procedure requires a previous backup. Before restoring a
partition, it is recommended that you back up any current important jobs, using the
procedure described in
Backing Up the Job List Database on page 33.
If you want to restore information from the image file on partition D back to partition
C , the current job list will be replaced with the old job list that was saved while
backing up partition C .
1. Exit the IC-304 print controller work space.
2. Insert DVD #1 (Windows XP operating system) into the DVD-RW drive.
3. From the Windows Start menu, select Shut Down > Restart > OK .
After the system restarts, the IC-304 print controller Startup Menu appears.
The following options are available:
4. Press 3 to use the System Backup/Restore Tool .
Note: Before performing the restore procedure, if the job list database was not
backed up or cannot be restored, you must format the image disks. See
Formatting the Image Disk on page 87.
Important: We recommend that you always disconnect the network cable
before installing software.
1. ColorServer Software Complete Overwrite Installation
2. ColorServer Software Preservation Installation (System Partition
Overwrite)
3. System Backup/Restore Tool
4. DOS prompt