Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 109 / 148

93
Some of the benefits of moving from Parallel ATA to Serial ATA technology are:
•
Improved performance—Serial ATA is faster than Parallel ATA
•
Simpler configuration—jumpers and settings eliminated
•
Reduces voltage and pin count
•
Smaller easier-to-route cables—eliminate the cable-length limitation and allow
better airflow
•
Improves data robustness
•
Provides backward compatibility
•
Increases disc drive data rates
4.4 Removing and Replacing the Side Cover and Front
Panel
This section describes the procedures used to remove and replace the
IC-304 print controller cover and front panel.
4.4.1 Removing the Side Cover
1. Turn off the IC-304 print controller and all peripheral devices. Disconnect all
external cables and power cords.
2. If necessary, unlock the side cover.
3. Remove the two screws that secure the side cover to the rear of the server.
4. Using the side cover handle, release the side cover by sliding it toward the rear
of the server.