Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 56 / 148

40 Chapter 2—Reinstalling the IC-304 Print Controller Software
2.4.1 Reinstalling the Operating System (Windows XP)
Before reinstalling, ensure that:
•
All external devices are disconnected from the IC-304 print controller
•
The following is available:
ˆ Software pack (DVD #1, DVD #2)
Note: DVD #1, which includes the operating system, does not require entering a
license number or activation.
ˆ Computer name
ˆ
TCP/IP information
ˆ
Gateway, WINS address, and DNS information (if DHCP is not active on site)
ˆ AppleTalk zone information
ˆ
IPX information
Reinstalling the Windows XP Professional Operating System
1. If the IC-304 print controller is on and the IC-304 print controller workspace is
open:
a. Exit the workspace.
b. Place DVD #1 (Fast Install SLP) into the DVD-RW drive.
c. From the Windows Start menu, select
Shut Down > Restart > OK
. Wait
until the Color Server Startup menu appears and then proceed to step 2.
If your IC-304 print controller is off:
a. Press the Power On/Off button on the front panel.
b. As soon as power is applied, place DVD #1 (Fast Install SLP), into the DVD-
RW drive.
c. Wait until the Color Server Startup menu appears.
2. When the
Color Server Startup
menu appears, the following options are
available:
•
ColorServer Software Complete Overwrite Installation
•
ColorServer Software Preservation Installation (System Partition Overwrite)
•
System Backup/Restore Tool
•
DOS prompt
3. Press 1 .
The confirmation message
Are you sure?
appears.
4. Press y (Yes) to confirm your selection.
All data on C and D will be overwritten.
Important: We recommend that you always disconnect the network cable
before installing software.
Note: To return to the
ColorServer Startup
menu, click
N
(No).