Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 57 / 148

41
5. The system starts copying the files. This process takes about eight minutes,
and then the following message appears:
Please remove any media from the DVD-RW drive and press
Ctrl+Alt+Del to reboot the computer.
6. Remove DVD #1 from the DVD-RW drive, and press
CTRL
+
ALT
+
DELETE
to
restart.
7. In the Computer Name and Administrator Password screen, type the name for
the IC-304 print controller—for example,
IC304_WinXP
.
8. Click Next .
The installation process continues.
9. At the end of the installation the system restarts. You are asked to insert DVD
#2 (application software).
10. Proceed to Reinstalling the Color Server Software .
2.4.2 Reinstalling the Color Server Software
1. Insert DVD #2 into the DVD-RW drive.
The IC-304 print controller software splash screen appears.
2. Click Start .
The Acrobat software setup begins.
After the Acrobat software setup is complete, the IC-304 print controller
installation starts.
3. When the License Agreement window opens, click Yes to continue the IC-304
print controller installation.
4. When the installation is complete:
a. Click Finish to restart the computer.
b. Remove DVD #2 from the DVD-RW drive.
c. Proceed to Using the Configuration Wizard on page 53.
Important:
In the
Administrator Name and Password
area, use the default settings.
If required, you can change the administrator name and password, but only
at the end of the installation process. See
Defining the Security Settings on
page 14.
Important: We recommend that you always disconnect the network cable
before installing software.