Konica Minolta IC-304 Plus Скачать руководство пользователя страница 43

Страница: 43 / 148

To back up the entire system (partitions

and

), press

. This option backs up

partitions

and

. You may need more than one DVD for the backup.

Press

to continue.

To continue, press

Follow the instructions in the message.

Norton Ghost software copies the files on partitions

and

to the DVD.

When a confirmation message appears notifying you that the backup
process was successfully completed, remove the DVD from the DVD-RW
drive and press any key to continue.

The computer restarts automatically.

You have completed backing up the IC-304 print controller system.

Note:

If an error occurs during the backup process, a message appears

asking you to contact customer support. Press any key to continue and
the computer restarts automatically.

Содержание IC-304 Plus





















































































































































Результаты поиска

Содержание IC-304 Plus

Отзывы:

Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 43 / 148

Результаты поиска

Содержание IC-304 Plus

Отзывы: