Komatsu PC45MR-30403, Руководство по эксплуатации и обслуживанию

Страница: 432 / 475

CHECK POINTS WHEN USING GENERAL ATTACHMENT SUCH AS CRUSHER
ETC
• Is selector valve (1) in position (a) for general attachment
such as crusher, etc. (2 way)?
If it is not in the position (a) for general attachment such as
crusher, etc. (2 way), turn it to the position.
• When handling the general attachment such as crusher, etc., follow the instruction manual from the manu-
facturer and use the attachment correctly.
METHOD FOR OPERATING MACHINE WHEN WORKING MODE IS NOT IN ATT/P
OR ATT/E FOR ATTACHMENT
If the working mode display does not indicate the attachment mode, set it to attachment mode according to the
following procedure.
1.
Press function switch “F5” on the standard screen.
“Working Mode” screen is displayed.
2.
Select attachment mode “ATT/P” or “ATT/E” with function
switches “F1” or “F2” or “F5”.
3.
While attachment mode “ATT/P” or “ATT/E” is selected,
press function switch “F4” or leave it as it is for 5 seconds.
Attachment mode is set to “ATT/P” or “ATT/E”, and the
screen returns to the standard screen.
REMARK
To return to the standard screen without changing the
working mode, press function switch “F3”.
ADJUST OIL FLOW RATE OF GENERAL ATTACHMENT SUCH AS CRUSHER
ETC
• Attachment flow rate can be adjusted in 8 levels (“8” to “1”).
“8” is the maximum flow rate and “1” is the minimum flow rate.
Approximately 8 ℓ/min per level can be changed.
• For the adjustment method for flow rate of general attachment such as crusher, etc., see “ATTACHMENT
SETTING”.
ATTACHMENTS AND OPTIONS HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
6-15