Komatsu PC45MR-30403, Руководство по эксплуатации и обслуживанию

Страница: 30 / 475

PRECAUTIONS WHEN STANDING UP FROM OPERATOR'S SEAT
Before standing up from the operator's seat in order to open or
close the front window or to adjust the operator's seat, be sure
to lower the work equipment and blade to the ground, grip the
operating portion on top of the lock lever (1) to set the lock lev-
er (1) to LOCK position (L), and stop the engine.
If the control levers are touched by mistake, there is danger
that the machine may suddenly move and cause serious per-
sonal injury or death.
PRECAUTIONS WHEN LEAVING MACHINE
If the proper procedures are not taken when parking the machine, the machine may suddenly move off by itself,
and this may lead to serious personal injury or death. Observe the following.
• When leaving the machine, be sure to make the undercar-
riage and upper structure point to the same direction, low-
er the work equipment and blade to the ground, grip the
operating portion on top of the lock lever (1) to set the lock
lever (1) to LOCK position (L), and stop the engine.
• If the seat is positioned forward, your body or clothes will
easily touch the levers.
Shift the seat backward to keep enough space, and then
get off the machine.
• Lock all the places and always take the key with you and
keep it in the specified place.
EMERGENCY EXIT FROM OPERATOR'S CAB
• If it should be impossible to open the door of the cab, break the window glass with the hammer supplied
and use the window as an emergency escape.
• When escaping, remove the pieces of glass from the window frame first and be careful not to cut yourself
on the glass. Be careful also not to slip on the broken pieces of glass on the ground.
DO NOT GET CAUGHT IN WORK EQUIPMENT
The clearance in the area around the work equipment changes according to the movement of the link. If you are
caught, this may lead to serious personal injury or death. Do not allow anyone near any of the rotating or tele-
scopic parts.
SAFETY
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
2-19