Komatsu PC45MR-30403, Руководство по эксплуатации и обслуживанию

Страница: 365 / 475

METHOD FOR WASHING WASHABLE FLOOR
k k
WARNING
• Select a firm flat place for work.
• If the control levers or control pedals are touched by mistake, there is danger that the machine may
suddenly move and cause serious personal injury or death.
Always set the lock lever securely to LOCK position before leaving the operator's seat.
On the washable cab floor, it is possible to flush out the dirt directly with water.
METHOD FOR CLEANING CAB FLOOR
NOTICE
Do not let the machine monitor, connectors, air condition-
er and the filters inside the operator cab get wet during the
cleaning.
1.
Start the engine.
2.
Set the lock lever to FREE position (F).
Be sure to operate the lock lever by the operating portion
on the top.
3.
Place the machine on a firm, level ground.
4.
Lower the work equipment to the ground and set the ma-
chine in a stable condition.
1) Operate the work equipment control levers to make
the bucket bottom level and lower it to the ground.
2) Push the blade control lever forward to lower the
blade to the ground.
5.
Set the lock lever to LOCK position (L).
Be sure to operate the lock lever by the operating portion
on the top.
6.
Stop the engine.
7.
Flush out the dirt on the floor directly with water.
MAINTENANCE PROCEDURE MAINTENANCE
4-56