9.6.2.18. Kentix360
Like the Kentix AlarmManager also the AccessPoint can be connected to the Kentix360 cloud service. If you
already have a Kentix360 account, you can simply add the AccessPoint to this account.
Only the Master-AccessPoint has to be configured for the cloud operation.
Otherwise a new account can be created using the „Register now“ button.
After the registration the account data can still be changed later.
Devices registered for the cloud service can be administrated here.
9.6.2.19. System - Logbook
This is the system log of the AccessPoint. All events except the bookings at doors are listed here. The logbook
contains e.g. warnings about critical system states (low battery charge level).
9.6.2.20. System - System settings
Create / Restore Backup
Here a complete backup of the configuration can be created and also restored. It is recommended to create a
complete backup after the final setup of all doors, profiles and users.
Firmware update
New firmware updates for the AccessPoint can be uploaded here, if necessary.
Select the firmware-image file via the file-dialog and press „Start update“.
9.6.2.21. System - SD card
This is the administration for an SD card inserted in the AccessPoint.
An SD card is required to store images from network cameras.
A newly inserted card can also be formatted directly for a usage in the AccessPoint.
Any SD card with form factor "microSD" can be used in the AccessPoint. The capacity should be at least 8
gigabytes minimum and 128 gigabyte maximum.
For information on features and pricing of the Kentix360 cloud service please visit www.kentix.com
NOTE!
The backup always consists of the complete configuration including all DoorLock-devices in the system. As
long as none of the components in the system has been replaced or reset to factory defaults, the complete
system can be recovered using the backup.
ATTENTION!
Please also note the information in the release notes attached to each firmware image.
NOTE!
In a system with multiple AccessPoints a SD-card has to be inserted in any AccessPoints, at which
cameras are assign to doors of these AccessPoints.
Page
(07-2018, subject to change)
kentix.com
88
Sm
a
rt
A
c
c
e
s
s
