7. KeyPad-Touch (KKPT)
The KeyPad is used for arm-disarm switching of the AlarmManager on site. The KeyPad is integrated into the
ZigBee© wireless network of the AlarmManager in the same way as a MultiSensor-RF. Please note that the
KeyPad does not work as a router and can not extend the network range.
The KeyPad is activated by pressing any button. The duty cycle is then about 10 seconds. During this time you
can arm or disarm single alarm zones or the complete system.
7.1. Adding a KeyPad
1. For adding a KeyPad to the AlarmManagers configuration start the teach-in process in the AlarmManagers
Dashboard and press the „learn button“ on the back of the KeyPad.
2. The KeyPad’s LEDs signalize the running teach-in process.
3. The teach-in process is finished when the KeyPad is found and the configuration mask opens.
The LEDs at the KeyPad turn green.
4. To add the KeyPad to the devices list, click on Apply.
5. After saving the configuration the KeyPad is activated in the system.
Page
(07-2018, subject to change)
kentix.com
40
Learn button
Battery holder
(2x Standard Micro AAA)
Ke
yPa
d
-T
o
u
ch
Accessories
