3.3. StarterSet with optional equipment
1.
MultiSensor-LAN:
Establish network connection and external power supply, if needed.
Connect to the sensor via browser by entering the Default-IP (
192.168.100.223
).
Press „Login“ to reach configurations menu (Username: „
admin
“, Password: „
password
“).
Activate AlarmManager communication in the communication settings.
After saving the settings the MultiSensor can be added to the AlarmManager configuration.
2.
Leakage-Sensor:
The connection of a Leakage-Sensor is realized either by a direct connection to an AlarmManager,
MultiSensor-LAN or with a KIO1-Power-Adapter (required for a connection to a MultiSensor-RF). The
configuration is then done on the device to which the leakage sensor is connected.
Enter a name in the „External sensors“ section and switch the alarming of the input to „Alarm when open“
and „Always-Active“.
3.
MultiSensor-Door:
Please follow the the instructions for adding new sensors as described in this manual. Also note that there
are differences in procedure depending on the type of MultiSensor.
Page (07-2018, subject to change)
kentix.com
9
