9.4.6.
Master card set
9.4.7.
AccessPoint
9.4.8.
Accessories
To replace the batteries at an Online knob or cabinet lock a special battery replacement tool is required. The
replacement tool for an Online knob is already included in every master card. For the cabinet locks, the tool has
to be purchased separately.
For the replacement of the battery in a door lever a matching Allen key is required. This is always supplied
together with the door lever.
When fully discharged, it is no longer possible to open a Online knob for a battery replacement. For this purpose
a „low power adapter“ is available to make single access bookings. A description of this emergency opening can
be found later in this manual.
With the master cart set the DoorLock-devices are prepared for
the operation.
Only one master card set is required per system / installation,
which consists of these 4 cards:
• System card
• Servicekey card
• Battery change card
• Dismantling card
The AccessPoint is the central component of the access solution.
Online-knobs, door levers, wall readers and cabinet locks are
connected wireless to this device. The AccessPoint is then
integrated into the network via a PoE-enabled Switch.
Now the basic settings like IP-addresses, doors and user data
can be done via the web-interface.
A description of the configuration can be found later in this
manual.
Page
(07-2018, subject to change)
kentix.com
56
NOTE!
Always keep these cards at a safe place. Without them a configuration of the components is no longer
possible.
When the Servicekey card (=programming card) is lost, it is possible to order a replacement card with the help
of the number printed on the System card.
Battery change card and dismantling card are only required at an Online knob, not for the other DoorLock-
devices.
O
n
lin
e
d
o
o
r
le
ve
r
-
in
st
a
lla
ti
o
n
Sm
a
rt
A
c
c
e
s
s
