6. MultiSensors
The MultiSensor-RF (ZigBee radio) and MultiSensor-LAN (network) mainly differ in the way of communication.
Additionally the MultiSensor-LAN offers the possibility to operate without an AlarmManager stand-alone. Both
types of the MultiSensor offer a wide range of integrated sensors and so are the ideal device to completely
monitor critical infrastructures.
6.1. Mounting instructions for MultiSensor-RF / -LAN / -LAN-RF
The MultiSensor is equipped with various individual sensors. To get an optimal sensitivity and function of the
sensors, please note the following installation instructions.
Note the following instructions:
• Do not install close to heaters or direct heat.
• Avoid detection of moving objects such as fans, plants, trees, flags, etc.
• Don´t cover the Sensor. The PIR-Sensor needs inter-visibility for detection.
6.2. Coverage of the integrated PIR movement detector
The range of the MultiSensor is depending on the configured sensitivity about 8m. You get the best results,
when objects/persons move past the MultiSensor.
!
ceiling suspension
wall fastening
Page
(07-2018, subject to change)
kentix.com
27
Mu
lti
Se
n
so
rs
Sm
a
rt
Mo
n
ito
ri
n
g
