The RFID-cards for the users are also added with the programming mode in the offline-mode:
It is also possible to remove single RFID user-cards by presenting them again during programming mode:
No
Step
Note / Signalization
1
Present Servicekey card (
yellow
) in front of
DoorLock-devices reader unit to start the
programming mode.
2
Present RFID user card in front of the reader unit.
3
Present Servicekey card (
yellow
) in front of the
reader unit to leave programming mode.
1x long sound, 1x short sound
wait for 5 seconds
2x short sound, LEDs light green
wait for 5 seconds, then the next card can be directly learned
1x short sound, 1x long sound
No
Step
Note / Signalization
1
Present Servicekey card (
yellow
) in front of
DoorLock-devices reader unit to start the
programming mode.
2
Present RFID user card in front of the reader unit.
3
Present Servicekey card (
yellow
) in front of the
reader unit to leave programming mode.
1x long sound, 1x short sound
wait for 5 seconds
2x long sound, LEDs light red
wait for 5 seconds, then the next card can be directly learned
1x short sound, 1x long sound
Page
(07-2018, subject to change)
kentix.com
76
NOTE!
In offline mode a DoorLock-device must be reset to delete lost RFID user cards.
For a description please read the chapter „Reset components“ later in this manual.
Sm
a
rt
A
c
c
e
s
s
