Series 2600 System SourceMeters Reference Manual
Instrument Control Library 12-65
Return to
2600S-901-01 Rev. A / May 2006
smuX.cal.unlock
X = SMU channel (a or b)
Function
Enables the commands that change calibration settings.
Usage
smuX.cal.unlock(password)
password
Calibration
password.
Remarks
• This function enables the calibration functions to change the calibration settings.
• The password when the unit is shipped from the factory is “KI0026XX”.
Details
(calibration).
Also see
Example
Unlocks calibration for SMU A:
smua.cal.unlock("KI0026XX")
smuX.contact.calibratelo
X = SMU channel (a or b)
Function
Calibrate the low/sense low contact check measurement.
Usage
smuX.contact.calibratehi(cp1measured, cp1reference,
cp2measured, cp2reference)
cp1measured
-- the value measured by this SMU for calibration point 1.
cp1reference
-- the reference measurement for calibration point 1 as measured
externally.
cp2measured
-- the value measured by this SMU for calibration point 2.
cp2reference
-- the reference measurement for calibration point 2 as measured
externally.
Remarks
• Contact check measurement calibration does not require range information.
• Typically the two calibration points used will be near 0
Ω
for calibration point 1 and
50
Ω
for calibration point 2.
• All four measurements (
cp1measured
,
cp1reference
,
cp2measured
, and
cp2reference
) must be made with the active calibration set. Corruption of the
calibration constants may result if this is not heeded.
• The new calibration constants will be activated immediately but they will not be
written to non-volatile storage. Use
smuX.cal.save
to commit the new constants
to nonvolatile storage. The active calibration constants will stay in effect until the
instrument is power cycled or a calibration set is loaded from non-volatile storage
with the
smuX.cal.restore
function.
• This function will be disabled until a successful call to
smuX.cal.unlock
is made.
Details
(calibration).
Also see
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......