Table 7-6
Recall attributes
Recall attribute
1
Description
measurefunctions
An array (a LUA table) of strings indicating the function measured
for the reading (Current, Voltage, Ohms or Watts).
measureranges
An array (a LUA table) of full scale range values for the measure
range used when the measurement was made.
readings
An array (a LUA table) of the readings stored in the reading buffer.
This array holds the same data that is returned when the reading
buffer is accessed directly, i.e., rb[2] and rb.readings[2] are the
same value.
sourcefunctions
An array (a LUA table) of strings indicating the source function at
the time of the measurement (Current or Voltage).
sourceoutputstates
An array (a LUA table) of strings indicating the state of the source
(Off or On).
sourceranges
An array (a LUA table) of full scale range values for the source
range used when the measurement was made.
sourcevalues
If enabled, an array (a LUA table) of the sourced values in effect at
the time of the reading.
statuses
An array (a LUA table) of status values for all of the readings in the
buffer. The status values are floating-point numbers that encode
the status value into a floating-point value (see
).
timestamps
An array (a LUA table) of timestamps, in seconds, of when each
reading occurred. These are relative to the
basetimestamp
for
).
1. The default attribute is
readings
and can be omitted. For example,
smua.nvbuffer1
and
smua.nvbuffer1.readings
will both return readings from Channel A, buffer 1.
Series 2600 System SourceMeters Reference Manual
Buffer (Data Store)
7-9
Return to
2600S-901-01 Rev. A / May 2006
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......