66
Decrypt in standby
The “Decrypt in standby” option is
displayed only if a recording was made
from an encrypted channel with the
“Decryption: No” setting.
Press the
button to decrypt the
recording. The symbol for an encrypted
recording (key) is marked with a red dot
(see screenshot bottom right). When you
next switch the receiver to standby the
recording will immediately be decrypted.
The receiver display shows the
progress of the decryption. Wait until the
decryption is complete and the receiver
is in standby mode to turn the receiver
back on.
In the section “Main menu - Interface Setup” under “Common Interface”, “Decrypt in standby”
section, you can select “On”. All recordings that were made with encryption will then
automatically be decrypted in standby mode.
Recording archive (playing back/editing recordings)
See “Folders in the recording archive”, “Create new folder ...”.
Create new folder
See “Folders in the recording archive”, “Move to folder ...”.
Move to folder
Tip!