92
FEC
Use the
buttons to select the applicable error rate (Viterbi rate). When searching for
DVB S(SD) transponders you need not state the error rate. Instead a
fi
xed display of “Automatic”
appears. When searching for DVB S2(HD) transponders you must state the correct error rate.
Either QPSK 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 or 8PSK 2/3, 3/4, 3/5, 5/6, 8/9 or 9/10.
Polarisation
Press the
buttons to select the correct polarisation (horizontal or vertical).
Symbol Rate
Use the number pad to enter the corresponding symbol rate.
Channel Search Mode
Use the
buttons to select the type of channels that are to be searched for. You have three options:
- “free & scrambled”
All channels are searched for
- “only free”
Only free-to-air channels are searched for
- “only scrambled”
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CA (Conditional Access) module and
a valid smart card together with a valid subscription to the relevant Pay TV provider.
Network Search
Use the
buttons (On/Off) to select whether a network search should be performed. If you set
the network search to “Off”, only the factory stored transponders of the satellite(s) you previously
selected will be searched for new as yet unlisted channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located. They
are then stored and scanned for new channels in the same way as the existing transponders. Once you
have de
fi
ned all the settings, use the
buttons to switch to the “Start Search” selection
fi
eld
and con
fi
rm the start of the search using the
button.
The following on-screen displays that appear during and in connection with the search are identical to
those for an automatic search.
Main Menu - Search Channels
You can cancel the search at any
time by pressing the
button.
