91
Main Menu - Search Channels
Manual Channel Search
After calling up the menu you will see the
following on-screen display:
The
buttons allow you to select
different sets of parameters for the search.
Satellite
Use the
buttons to select the satellite on which the transponder you want to scan is
located. By pressing the
button at this point, you can view a list of the installed satellites. Use
the
buttons to select the satellite you want and con
fi
rm with the
button. Make sure your
reception system is aligned to this/these satellite(s). If you want to search several transponders on
one satellite, you should start an automatic search of the transmitting satellite.
Transponder Frequency
Use the
buttons (transponder frequency already saved) or the number pad (transponder
frequency not yet saved) to select the transponder frequency on which the channel being sought
is transmitted. By pressing the
button at this point, you can view a list of the transponders stored
for the selected satellite. Use the
button to select the desired transponder and con
fi
rm with the
button. At the bottom right of the screen display, the receiver shows the current signal strength
and signal quality of the selected transponder.
The “DVB Type”, “FEC”, “Polarisation” and “Symbol Rate” selection items need be entered only
if the transponder has yet to be saved.
DVB Type
Use the
buttons to select whether you want to search for standard channels (DVB-S (SD)) or
for HDTV channels (DVB-S2 (HDTV)).