109
You can now use the remote control for your receiver to set a new remote control code (the remote
control code 1 is set as standard). Press the following buttons simultaneously:
-
+
+
for remote control code 1
-
+
+
for remote control code 2
-
+
+
for remote control code 3
-
+
+
for remote control code 4
Now press the
button. If the receiver does not close the on-screen display, the receiver and the
remote control are not set to the same remote control code. Check your setting again.
To set the remote control for whichever remote control code is required in future, proceed as follows:
-
+
for remote control code 1
-
+
for remote control code 2
-
+
for remote control code 3
-
+
for remote control code 4
Main menu - Settings
If you have another Kathrein receiver in use that was supplied with the RC 660 remote
control, you can use the UFS 913 remote control to operate that other receiver also.
On the UFS 913 remote control, the codes for remotely controlling the RC 660 begin with “5”:
+
= Remote control code 1 for the RC 660
+
= Remote control code 2 for the RC 660
+
= Remote control code 3 for the RC 660
+
= Remote control code 4 for the RC 660
