126
Main menu - Interfaces
HDD Management
After calling up the menu you will see the
following on-screen display (example):
If you select “On”, you can view another encrypted channel through the same CA module and the
currently selected transponder at the same time as recording an encrypted channel. The number of
other encrypted channels that you can view depends on the CA module you are using.
Here you can choose between the settings “On” and “Off”. If it is set to “On”, programmes recorded
with encryption will be automatically decrypted by the receiver in standby mode. For this, it is essential
that the CA module with a Smartcard is located in the common interface of the receiver. Manual
selection for decryption in standby via the recording archive (My recordings) is then not required.
Automatic Decryption in standby mode
Use the
buttons to select the desired action and con
fi
rm using the
button. The following
on-screen display appears (example: formatting the recording archive):
During formatting, all data will be deleted from the relevant directory. Deleted data
cannot be restored – it is irrevocably deleted!
Press the
button to con
fi
rm, or the
button to cancel.
You have the following selection options:
- Format Record Archive (delete)
- Format Media Archive (delete)
- Make dedicatd HDD *)
You can only use the
fi
rst two functions if an archive hard disk has already been set up.
Format a recording/media archive
