117
Main menu - Settings
Frequency
Use the
buttons (transponder frequency already stored) or the number pad (transponder
frequency not yet stored) to select the transponder frequency to be tested. At the bottom right of the
on-screen display, the receiver shows the current signal strength and signal quality of the selected
transponder.
The “DVB Type”, “FEC”, “Polarisation” and “Symbol Rate” selection items need be entered only
if the transponder has yet to be saved.
DVB Type
Select here whether standard channels (DVB-S (SD)) or HDTV channels (DVB-S2 (HDTV)) should be
received from the desired transponder.
FEC
Select the applicable error rate (Viterbi rate). You need not state the error rate for the DVB S (SD)
transponders. Instead a
fi
xed display of “Automatic” appears. You must state the correct error rate for
the DVB S2 (HD) transponders. Either QPSK 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 or 8PSK 2/3, 3/4, 3/5,
5/6, 8/9 or 9/10.
Polarisation
Select the correct polarisation (horizontal or vertical).
Symbol Rate
Use the number pad to enter the corresponding symbol rate.
Tuner Con
fi
guration
You should make changes only if you are thoroughly familiar with the con
fi
guration
of your satellite reception system! If you are not familiar with the con
fi
guration of
your satellite reception system, contact your specialist dealer.
Instructions on how to perform the antenna con
fi
guration can be found in the Operating manual – Part 1,
“Connection and set-up”, “First Installation”.
The individual menus for the settings are not selected from the main menu using the
(green) button,
instead they must be called up manually using the
buttons.
