108
Main menu - Settings
Remote control code
After calling up the menu you will see the
following on-screen display:
You can use this function to allow
you to operate several receivers
(e.g. four UFS 913 units) using
the same remote control. You can
assign each receiver its own remote
control code. For this, it is essential
that the receiver was supplied
with the RC 670 remote control
(e.g. UFS 913) or with the RC 660
remote control (e.g. UFS 910).
Automatic
Manual
You need not make any further entry, the
receiver will automatically update the date and
time.
Use the number pad or the
buttons to
enter the correct date. Then use the
buttons to switch to the “Time”
fi
eld and use the
number pad or the
buttons to enter the
correct time. Then use the
button to con
fi
rm
your entry.
Setup Time Now
Press the
button. Depending on the desired time setup option (Automatic/Manual) the following
on-screen display then appears:
