96
Automatic software update
Main menu - Service menu
Select the required setting (On/Off) using the
buttons.
Setting “On”:
The receiver automatically searches for new software available every day when updating the tvtv data
and compares the channel list you have stored on the receiver with the broadcast delta channel list.
Your channel list
is not overwritten, only updated
. For example, if the name or frequency of a channel
changes, the old parameters for the affected channel are replaced by the new ones in your channel list
on the receiver. The channel is not moved in the channel list. New channels that have not yet been saved
in your channel list are added to the end of the list. Channels that are no longer broadcast are deleted.
The receiver does not make the changes automatically without your approval,
but saves them temporarily until the next time the receiver is started.
The next time the receiver is started you will see the following on-screen display.
Setting “Off”:
The receiver does not automatically search for new software available and does not compare the
channel list you have stored on the receiver with the broadcast delta channel list. However, you
can perform a software update manually at any time, as described under “Software Update” or
“Software Update by USB”.
If new software or changes to the channel list were found, you will see the following on-screen display
the next time the UFS 913 is started (the original on-screen displays may vary from these example
screenshots):
Press the
button to perform the
software update.
! New software available
Information UFS 913 date xx.xx.xxxx
Dear customer,
New software V x.xx is available.
xxx
You will
fi
nd more information at
www.kathrein.de
Cancel
Update software
