114
Post-Recording Time
Select here the number of minutes after the time set in the EPG the recording should run on for. You
can choose a value between one minute and 30 minutes, in one minute increments. The recording will
fi
nish that number of minutes after the due time. This provides contingency for minor variations in
transmission times.
Main menu - Settings
PVR Setup
After calling up the menu you will see the
following on-screen display:
Individual items are selected using the
buttons.
Changes to the current settings can be
made using the
buttons.
Automatic Timeshift
Select here whether automatic timeshifting is enabled or disabled. If this is set to “On”, the receiver
automatically starts recording the programme you are viewing in the background as soon as you switch to
the channel.
In manual record mode, you can then decide whether to record the programme from the current time
or from the time you switched to the channel. The advantage of this is that you do not lose the part of
the programme you were watching before you decided to record it! If this is set to “Off” you can only
record the programme as from the point you press Record, and lose the portion of the programme
before you started recording. See also the section “Basic Operation”, “Automatic Timeshift”.
Default Record Duration
Select here the default recording duration. If the channel information gives no start time or end time
for the programme that is to be recorded, the receiver will automatically use the default recording
duration that is set here. You can choose between 30 minutes and 3 hours, in 30 minute increments.
