Kässbohrer SILO Series, Руководство пользователя

Страница: 67 / 89

66 / 88
6. TRANSPORTATION
SOLUTIONS
6.1. Customs Legislation
The vehicle must be manufactured in such
a way that no material can be removed from
the sealed part or placed inside the vehicle
without breaking the customs seal or lea-
ving any visible traces.
Customs clearance should be easily app-
lied to the vehicle.
There should be no compartments in the
vehicle where items can be hidden.
It should be easily accessible to the secti-
ons where customs control will be carried
out in the vehicle.
6.1.1. Semi-Trailer Structure
Compliant with Customs
Legislation
In order for a semi-trailer to comply with the
customs legislation;
•
The parts that make up the semi-
trailer must be put together in such
a way that they cannot be remo-
ved from the outside and replaced,
or replaced without leaving any ob-
vious traces.
•
There must be a device on which
the customs seal can be applied
on other closing systems.
•
Ventilation holes must contain a
device to prevent entry into the ve-
hicle or placing material inside,
and the device must not be ope-
ned from the outside without lea-
ving a clear trace.
•
After the silo tank is filled, the cus-
toms clearance process starts
from the tank top front clearance
box by tightening all the covers,
passing through the manhole co-
vers, passes the rear discharge
cone through the wing nuts, and
by bringing to the tank rear right
lower customs clearance box, cle-
arence is made.
6.2. Dangerous Goods Transporta-
tion (ADR)
Vehicles carrying dangerous goods should
keep this plate in open position while dri-
ving. It is located at the rear of the vehicle,
but its exact location may vary according to
the construction of the vehicle. The ADR
plate is defined in the R105 legislation.
Approved vehicles in accordance with ADR
legislation must have an ADR identification
plate.
Opening ADR plate
ADR plate latches
Opening the plate: Open the plate in the
closed position upwards by turning the latch
(1) clockwise or counterclockwise by 90°,
attach the opened flap of the plate to the
latch (2) on the other side and fix it in the
same way as the opening procedure.