22
/
88
3.1.6.2. Activation of Brake Cham-
bers
Activation of brake chambers
•
Remove the nut (1) from release rod
(2) with a spanner.
•
Remove the release rod (2).
•
Screw the release rod (3) to their ho-
uses (3) on the brake chambers.
•
Close the plastic cover on the brake
chamber.
Brake chamber will be activated after this op-
eration.
Before this operation, the vehicle
must fixed securely with wheel
chocks. Serious injuries may
occur.
Don't drive without being sure that
all the brake system is working
properly after this operation.
3.2. Suspension System
Your vehicle is equipped with air suspension
system.
3.2.1.
Manuel Control Lever
Operation;
In the driving position, the air suspension sys-
tem keeps the semi-trailer permanently at a
certain level independently from the load. The
lowering/raising lever (1) at the control panel
can lower or raise the semi-trailer. for ramp ad-
justment on the loaded position.
Driving position of lever
You may turn the lever according to anti-
clockwise and raise the trailer.
Raising of suspension
You may turn the lever according to clockwise
and lower the trailer.
Содержание SILO Series
Страница 1: ......
Страница 89: ...88 88...