80
/
88
•
Disconnect the potential conduc-
tor.
•
Retract the folding handrail.
•
Check the load distribution (min /
max) filling level.
•
Install warning signs if you are
carrying dangerous goods.
7.3.6.
Discharging
Keep available and wear the appropriate
protective equipment, depending on the
material to be discharged. Follow ADR re-
gulati-ons and material safety instructions.
Only get onto the silo tank when the folding
handrail is raised and if the vehicle is secu-
red against accidental movement.
•
The handbrake of the vehicle must
be engaged.
•
The vehicle must be level.
The following procedures can be followed
to empty the silo tank:
Gravity discharge ( discharging onto the
ground):
Emptying
without
auxiliary
equipment. Simply allowing the product to
flow under gravity.
When gravity discharge is made
(with gravity, without giving air
into the tank), one of the man-
hole cover must be opened before star-
ting the discharge.
Compressed air discharge:
Emptying the
silo vehicle with the help of compressed air.
The compressed air is supplied from an
external or on board compressor.
When selecting an unloading procedure,
please take the following factors into acco-
unt:
•
Product type and characteristics
•
On-site conditions
•
Climate characteristics
7.3.6.1. Discharge With Comp-
ressor
The required air when the silo tank is unlo-
aded can be supplied externally, but also it
can be supplied from the compressor which
is generally mounted in front of the vehicle
according to the customer's demand.
See the manufacturer’s user’s manual for
operating instructions of compressor and
for more detailed information.
Connection of the compressor to the vehic-
le's air line; It is made with the connecting
coupling (1) in front, middle or rear of the
side air line.
Connect the end of the discharge line loca-
ted at the rear or side of the vehicle to the
discharge line of the ground silo in the faci-
lity.
Start the compressor, wait until 2 bar pres-
sure is observed in the air line.
Open the fluidizing air of the first cone.
Open the jet air halfway.
Keep the pinch valve of the first cone open
until about ¾ of this cone is empty.
Close first cone pinch valve, fluidizer air
and jet air.
•
Jet air (1st cone) (1)
•
Fluidiser air (1st cone) (2)
•
Jet air (2nd cone) (3)
•
Fluidiser air (2nd cone) (4)
Collector
Содержание SILO Series
Страница 1: ......
Страница 89: ...88 88...