Kässbohrer SILO Series, Руководство пользователя

Страница: 36 / 89

35 / 88
Only place wheel chocks on
wheels on fixed axles, never on
idle/steer axles.
When the wheel chocks is fixed in-
side the holder, be sure that the
pins will be mounted properly.
After driving operations, place the
wheel chocks properly.
3.12.1. Pin Type Wheel Chock
Holder
Removing the wheel chock from holders :
Pull out the cotter pin (1) located at the end of
the wheel chock holder. Then take the wheel
chock from its slot by pulling it sideways from
the wheel chock holder
.
Pin type wheel choke holder
Placing the wheel chock from Its holder :
Place the wheel chocks on the holders and
mount the cotter pin (1) to pin.
3.12.1. Pocket Type Wheel Chock Hol-
der
Pocket type wheel chock holder
Removing the wheel chock from holders:
Remove the wheel chocks by pushing the han-
dle (1) which is located at the end of the
chock's holder from the wheel chock to the
other side.
Placing the wheel chock from Its holder:
Insert the wheel chock by pulling the handle
(1) which is located at the end of the wheel
chock's holder.
3.13. Boxes and Storage Units
After making sure that the cabi-
nets and storage units are com-
pletely closed, the materials in-
side are fixed and safe, start driving. Fall-
ing parts can cause a traffic accident.
Make sure that the necessary
safety precautions are taken while
using the cabinets and storage
units.
3.13.1. Stainless Steel Toolbox
It is used to store tools and tools. It is usually
mounted on the driver's side of the vehicle.