53
/
88
Open the ball valve with the lever. If air is given
out, close the valve and immediately disc-
harge all the air inside the silo vehicle by using
the air discharge valve.
Open the blind cover by using the yoke
wrench.
Turn the blind cover counter clock wise until
the end and remove.
You can make filling or cleaning by fastening
the hose onto the filling neck that is opened.
Closing the filling neck connection:
Follow the above procedures in reverse order
to close the filling neck.
When opening the loading coup-
ling of a silo tank that is under
pressure, there is a danger that the
blind cover will be blown off explosively,
despite all the constructional safety mea-
sures. If this happens you or others could
be seriously or even fatally, injured.
Before opening the loading couplings,
check whether the silo tank is under pres-
sure.
4.1.2.19. Vibrator
Due to their consistency, certain types of ma-
terial can compact during long journeys and
stick to the silo tank’s walls. It is hard to unload
these type of materials when the silo tank is
raised.
Vibrator is an pneumatic device. It shakes the
silo tank for a short time, these vibrations free
the material from the silo tank’s walls so that it
can be discharged. This is an optional specifi-
cation.
4.1.2.19.1.
Vibrator Bracket
These are the housings on which the vibrator
is mounted. There are two vibrator housings,
one of them is on the front dome and the other
one is just in front of the roll over bearing.
If the vibrator is used for too long,
it can damage the welded seams
of the silo tank. Only use the vib-
rator for short periods of time.
4.1.2.20. Compressor
The required air when the silo tank is unloaded
can be supplied externally, but also it can be
supplied from the compressor which is gene-
rally mounted in front of the vehicle according
to the customer's demand.
See the manufacturer’s user’s manual for ope-
rating instructions of compressor and for more
detailed information.
4.1.2.21. Discharge Elbow
The discharge elbow (1) is attached to the ma-
terial coupling when compressed air will be
used for emptying. The discharge elbow has a
coupling (2) for jet air that enables the vehicle
to be emptied with compressed air.
Discharge elbow
Содержание SILO Series
Страница 1: ......
Страница 89: ...88 88...