Kässbohrer SILO Series, Руководство пользователя

Страница: 76 / 89

75 / 88
tank, has air intake flow of minimum 500-
600 m
3
/ h, has the power of 40 KW is nee-
ded.)
Hydraulic connection hoses should be con-
nected to the tractor and the hydraulic cy-
linder should be made operational.
Connection of the compressor to the vehic-
le's air line; It is made with the connecting
coupling in front of the side air line. The air
line is connected to the air battery located
at the rear of the vehicle with a coupling.
Side air line
The discharge elbow should be coupled to
the discharge cone end.
Discharge cone
While the air ventilation valve (1), the fluidi-
zation valve (3) going to the discharge
cone, the jet air valve (2) to the discharge
line are closed, the top air line (air line en-
tering the tank from the top of the tank)
valve (4) should be opened and the internal
pressure of the tank should expected to rise
up to 2 bar with the compressed air supp-
lied from the compressor. This pressure
value of 2 bars can be seen from 2 mano-
meters on the air line.
Air battery
When the internal pressure of the tank re-
aches 2 bar (it reaches this value in 1.5-2
minutes with the appropriate compressor),
open the connection of the jet air line, open
the discharge valve and start the discharge
of the material. First, open the fluidization
valve in the collector a quarter, in order to
prevent the flow of material from accumula-
ting in the outlet cone. After the flow starts,
open it fully so that the flow accelerates.
Activate the vibrator located at the front
and/or rear of the tank to spill the materials
adhering to the inner wall of the tank.
When discharge is complete, turn off the
compressor, disconnect the compressor
from the air line, turn off all valves on the
vehicle.
Before start discharging, vehic-
les with mechanical or hydrau-
lic landing leg at the rear should
be lowered to the ground and the vehicle
should be leveled.