Kässbohrer SILO Series, Руководство пользователя

Страница: 60 / 89

59 / 88
Location of buttons
4.2.2.15. Discharge Types on
SSL Vehicles
On SSL Vehicles discharging cones can be
offered to the customers in 3 different vari-
ations. These variations can change accor-
ding to the vehicle’s construction and the
customers’ demands.
Variations:
Discharging from rear:
The discharging lines of the front and rear
cones become one line by combining and
they discharge at the rear part of the ve-
hicle.
Discharging from side:
The emptying lines of the front and rear co-
nes combine and discharge at the side of
the vehicle.
Separately discharging:
The discharging line of each cone dischar-
ges at the side of the vehicle individually.
On SSL horizontal silo vehicles
there can be three compressor
couplings at the front, side and
rear to enable easier operation.
Side air line connection
4.2.2.16. Opening the Filling
Neck Connection
Open the ball valve with the lever. If air is
given out, close the valve and immediately
discharge all the air inside the silo vehicle
by using the air discharge valve.
Open the blind cover by using the yoke
wrench.
Turn the blind cover counter clock wise until
the end and remove.
You can make filling or cleaning by faste-
ning the hose onto the filling neck (1) that is
opened.
Filling neck
4.2.2.17. Closing the Filling Neck
Connection
Follow the above procedures in reverse or-
der to close the filling neck.