Kässbohrer SILO Series, Руководство пользователя

Страница: 57 / 89

56 / 88
Jet air line
4.2.2.6. Jet Air Line Valve
The jet air line ball valve is located on the
side air line and it controls the air which
passes into the jet air line. To stop the
compressed air which passes to the line,
you can bring the lever to the closed posi-
tion by turning 90 degrees counter
clockwise.
4.2.2.7. Top Air Line
The air which comes to the air battery pas-
sing through the side air line, is sent to the
top of the vehicle by means of the top air
line. The top air line enters into the silo tank
from the top (1) of the silo vehicle. The en-
tering point of the air line could vary accor-
ding to the construction of the vehicle. The
air, which enters into the silo tank via the
top air line, with operating pressure of 2 bar,
both keeps inside of the silo tank pressuri-
zed and mixes inside of the silo tank to
make the products to be discharged comp-
letely and easily.
Top air line
4.2.2.8. Top Air Line Ball Valve
Top air line ball valve controls the air which
enters the silo tank. If it is turned off no air
could enter into the silo tank from the top.
The number and location of the
manometer could change accor-
ding to the vehicle type.
4.2.2.9. Pressure Relief Valve
The safety valve is an important protective
device. It limits the pressure in the silo tank
(operating pressure) to max 2 bar, thus pre-
venting the tank being exposed to exces-
sive pressure. The safety valve is mounted
on the side air line. The system pressure
can be read from the manometer (2) which
is right at the inlet of the valve. Safety valve
must be cleaned periodically.
Pressure relief valve and manometer