85
/
88
maintenance instructions booklet gi-
ven by the axle manufacturer with
your vehicle should be applied meti-
culously and in accordance with the
periods given in the same booklet. Fa-
ilure to carry out such maintenance
may affect the service life of the axles
of the vehicle and may cause the
axles to be out of warranty in case of
a possible malfunction.
•
The healthy operation of the brake
system of the semi-trailer depends on
the use of the semi-trailer with the
same system and/or compatible trac-
tor. For this reason, it is obligatory for
the buyer to make the brake adjust-
ment adjustment at the authorized
service of the tractor company toget-
her with the tractor to which these
semi-trailers / semi-trailers will be
matched. In case the semi-trailer is
paired and used with the tractor / trac-
tors for which the adjustment of the
semi-trailer is not made or cannot be
made, the malfunctions and damages
that may occur in the brake system or
the tractor and the semi-trailer are out-
side the responsibility of our com-
pany, and all responsibility in this re-
gard belongs to the buyer.
8.8. Trouble Shooting
8.8.1.
Safety Instructions
Risk of accident due to unprofes-
sional troubleshooting.
Read the following safety regulations.
•
Comply with all laws, rules, and regu-
lations to prevent accidents.
•
Comply with all environmental protec-
tion rules. Dispose of process resi-
dues, cleaning aids and other resi-
dues in accordance with these rules.
•
Troubleshooting work should only be
carried out by trained personnel.
•
Before troubleshooting, park the vehi-
cle on a firm, and even surface and
level it, and make sure that it is se-
cured against sliding/tipping.
•
Upon completion of the repair, ensure
that all protective devices are correctly
placed and secured.
•
Only use original spare parts!
In cold weather, ice may form on
the floor. Care should be taken
while walking.
For the repair process of the mal-
functioning product, follow the in-
structions given by the manufac-
turer of that product in the user manual.
8.8.2. Spare Tire Replacement
Wheel nuts that are not tightened
properly will loosen. This may
cause accidents. Tighten the
wheel nuts to the specified torque. You can
find the torque values in the manufactur-
er's manual for "Axles". Check the tight-
ness of the nuts immediately after each tire
change.
Removing the tire:
•
Park the vehicle in a safe place away
from traffic.
•
Secure the vehicle with wheel chocks
against rolling away or tipping over.
•
Apply the spring-loaded parking
brake. (See: "Construction Compo-
nents and Use of Semi-trailer" for de-
tailed information.)
Lock the tractor securely to pre-
vent spontaneous or uninten-
tional movement of the tractor
during tire changing.
•
Loosen the wheel nuts only one turn.
•
Place the lever jack under the axle as
close as possible to the tire to be rep-
laced.
•
Raise the axle until the tire to be re-
placed is no longer in contact with the
ground. Remove the wheel nuts.
Содержание SILO Series
Страница 1: ......
Страница 89: ...88 88...
