Kässbohrer SILO Series, Руководство пользователя

Страница: 21 / 89

20 / 88
The EBS mistake lamp on the truck screen will
be turned on when the ignition key is activated.
If there is no failure on the EBS system, the
lamp will be turned off in appr. 2 seconds.
After 7 km/hours speed, If there is a failure on
the EBS system (Sensor mistake and etc.)
EBS lamps will be flashed.
If the EBS lamp is activated, please contact
with authorized services immediately.
The trailers equipped with a Trailer
EBS E braking system may only
be used with tractors with.
•
ISO 7638-1996 connectors (ABS +
CAN) or ISO 7638, 7 pin with CAN
data line (EBS Truck)
If you drive without EBS connect-
ors or if there is a problem on the
EBS system, the brake system will
not be worked properly. This situation may
cause an accident.
Trailers are equipped with an ad-
ditional power supply for the EBS
system. Thanks to the extra power
supply from brake lamps, when the EBS
connector is damaged, an extra safety
function will be activated. The EBS system
will be fed from brake lamps and ALB (au-
tomatic load sensing braking pressure)
and ABV (anti-skid system) functions will
be activated.
3.1.4. Rollover Stability Support
(RSS)
Rollover stability support (RSS) is integrated
into the trailer modulator.
The vehicle’s elec-
tronic control unit analyzes wheel speed, load
information and transverse acceleration data
to detect the likelihood of vehicle roll-over be-
fore the driver realizes there is a risk and au-
tomatically applies the brakes. But don’t forget
that this system cannot cancel the laws of
physics.
When the roll-over risk is detected, the EBS
system makes automatically brakes and tries
the reduce the roll-over risk. After risk, the
RSS function will be shut down automatically.
The RSS optimizes driving charac-
teristics and in emergencies may
help to prevent accidents. But can-
not completely guarantee.
3.1.5. PREV (Park Release Emer-
gency Valve)
Generally, brake control systems will be lo-
cated on the driver's side. It may be different
on your vehicle according to the vehicle's con-
struction.
PREV Buttons
Black button (1): Service brake button.
Red button (2): Park brake button
When you are driving the trailers,
the red button must be pushed po-
sition and the black button has to
be pulled position.
3.1.5.1. Service Brake
Thanks to the service brake, the trailer can be
made maneuvers without air connections. The
black button can be used only without air con-
nections on the trailer.
When you push the black button, the service
brake will be disabled. When you pull the black
button, the service brake will be activated.
If the service brake is used a lot of
times, without an air connection,
air pressure in the system and
braking power may reduce.