manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 122 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 122

10.3.3.1 Machine maintenance schedule

➤ Carry out maintenance tasks according to the following schedule.

Component:
Task

Daily

A250

A500

A1000

A2000

A36000

see chapter

Note

Engine:
Check the oil level.

X

10.4.4

Clean the engine air filter.

X

10.4.2

Replace the engine oil.

X

10.4.6

Replace the engine oil filter.

X

10.4.7

KS; SW

Check engine belt tension and

re-tension if necessary.

X

10.4.9

KS; SW

Replace the engine air filter.

X

10.4.2

Check the inlet line between air

filter, turbo air cooler and en‐

gine.

X

KS; SW

Have intercooler maintained.

X

KS; SW

Have the turbocharger checked.

X

KS; SW

Have the engine mounts

checked.

X

KS; SW

Have the valve clearance adjus‐

ted.

X

KS; SW

Check the engine coolant level.

X

10.4.1

Clean the cooler.

X

10.6

Check radiator hose and hose

clips, have replaced if necessa‐

ry.

X

Check antifreeze concentration.

X

10.4.1

KS; SW

Change the coolant.

X

10.4.1

KS; SW

Fill up the fuel tank

X

Emptying the fuel pre-filter (wa‐

ter trap)

X

10.4.3

Clean the tank fuel strainer.

X

Cleaning the fuel tank.

X

Check fuel lines and hose

clamping bands, have replaced

if necessary.

X

KS; SW

Check the fuel return line for

leakage and firm fixing.

X

Change the fuel pre-filter.

X

10.4.3

KS; SW

KS = call KAESER SERVICE; SW = contact specialised workshop

10 Maintenance

10.3 Maintenance schedules

108

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов