manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 86 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 86

6.5  Option od

Connecting the battery trickle charger

The battery charger is wired ready for operation and only needs to be connected to the user's pow‐

er supply.

The charger is factory set for use on a 400 V, 3-phase supply. For use with a 230 V, 1-phase

supply, the charger connections must be changed as shown in the electrical diagram in chap‐

ter 13.4.4.

Precondition The power supply disconnecting device is switched off,

the device is locked off,

a check has been made that no voltage is present.

1. Have the power supply connected only by authorized installation personnel or an authorized

electrician.

2. Take all safety precautions as required by Standards such as IEC 364 or EN 1012, part 1 and

EN 60204, part 1, as well as national safety regulations (BGV A3 in Germany). In addition, ob‐

serve the regulations of the local electricity supplier.

3. Select power supply cable conductor cross-sections and fusing in accordance with local regu‐

lations.

4.

 Danger of fatal injury from electric shock!

➤ Switch off and lock out the power supply disconnecting device and check that no voltage is

present.

5. Connect the machine to the power supply.

Further information See chapter 2.7.3 for power supply specifications.

The electrical diagram in chapter 13.4.4 contains further details of the power supply connection.

6.6  Option rx

Installing a machine with stationary frame superstructure on a truck

platform

For safe footing, attach the machine frame with screw-in machine mounts on the load platform.

See the dimensional drawing in chapter 13.3 for position and dimensions of the machine mounts.
These machine mounts are either supplied with the machine or can be ordered separately from

KAESER.

Material Bolt-down machine feet (anti-vibration elements)

Fixing screws
Wrench

Precondition The machine is switched off.

Installing the machine mounts on the frame:

➤ Fasten the machine mounts (anti-vibration elements) at the frame:

Fasten the machine on the load platform:

Precondition The bolt-down machine mounts are attached to the machine.

6

Installation

6.5

Connecting the battery trickle charger

72

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов