manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 29 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 29

Initial engine oil quantity:

The engine is filled initially with the following engine oil:

Ambient temperatures [°F]

Viscosity class

–13 ..... > 86

SAE 5 W-30

Tab. 34 Initial engine oil quantity

2.6.3  Fuel recommendation

The diesel fuel must meet the requirements of EN 590 and ASTM D975 respectively.
The use of other fuels as well as the mixing with additives is only permitted after consultation with

the engine manufacturer.

Bio diesel:

According to EN 590 and ASTM D975, a specific portion of bio diesel is permitted in the fuel.
Depending on the country of origin, bio diesel can be produced from different plant materials and

thus have different properties.
Affected by temperature, atmospheric oxygen and time, these bio diesel components in the fuel

may decompose in the fuel and thus cause damages within the fuel system.

Engine without exhaust treatment:

To comply with emission regulations, diesel engines fitted with an exhaust gas treatment system

must be operated only with a sulphur-free diesel fuel. Compliance with the emission requirements

but also the durability of the individual exhaust gas treatment components is not assured if this re‐

quirement is ignored!

The following fuel specifications are approved:
■ Diesel fuels according to EN 590

─ (≤0.0010% Sulphur – EU: Level IIIB and higher)

■ Diesel fuels according to ASTM D975

─ (≤0.0015% Sulphur – EPA: Tier 4 interim and higher)

Never store fuel in galvanised containers!

The fuel must be filtered before it is filled into the machine when it has been supplied in bar‐

rels or canisters. This procedure prevents fault in the fuel system cause by contamination.

2.6.4  Engine coolant recommendation

In fluid-cooled engines, the cooling fluid must be treated and monitored to prevent engine damage.

Water quality:

An important factor for treating the cooling fluid is the correct water quality.

2

Technical Data

2.6

Engine

No.: 9_9570 07 USE

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

15

Option ld

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов