KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 426

KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 44

Task

Danger area

Authorized personnel

Transport

Within a 10 ft radius of the machine. Operating personnel to prepare for trans‐

port.
No personnel during transport.

Beneath the lifted machine.

No personnel!

Commissioning Within the machine.

Within a 3 ft radius of the machine.

Maintenance personnel

Operation

Within a 3 ft radius of the machine. Operating personnel

Maintenance

Within the machine.
Within a 3 ft radius of the machine.

Maintenance personnel

Tab. 47 Danger areas

3.6 Safety devices

Safety devices ensure safe working with the machine.
➤ Do not change, bypass or disable safety devices.
➤ Regularly check safety devices for their correct function.
➤ Do not remove or obliterate labels and notices.
➤ Ensure that labels and notices are clearly legible.

Further information More information on safety devices is contained in chapter 4.5.

3.7 Safety signs

The figure shows the position of the safety signs on the machine. The table lists the various safety

signs used and their meanings.

During cleaning or maintenance work, a check should be made that safety signs have not

been removed or obliterated . Have missing or illegible signs replaced!

Fig. 2 Location of safety signs

3

Safety and Responsibility

3.6

Safety devices

30

Operator Manual Screw Compressor
M250 SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

«
...
42
43
44
45
46
...
»

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов