manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 61 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 61

4.7.1.2 Option da

Cyclone separator

Condensate accumulating during the air cooling process is separated, fed to the exhaust gas si‐

lencer and evaporated there.

4.7.1.3 Option db

Heat exchanger

The oil/air heat exchanger is fed with hot compressor cooling oil that warms the outgoing moisture-

reduced compressed air.
This warm, dry compressed air is ideal for sand blasting, for example.

4.7.1.4 Option dd

Filter combination

The dried compressed air passes through a pre-filter and micro-filter combination and emerges oil-

free.

4.7.1.5 Option dc

Fresh air filter

Compressed air from oil-injected compressors may not be used directly as breathing air.
The concentration of contaminants will increase during the compression of the intake ambient air

and cooling oil and abraded particles can enter the compressed air. This requires a subsequent

treatment of the pre-filtered compressed air.
Air must be filtered to remove all contaminants, such as fine dust and oil as well as odors, before it

can be used for breathing purposes.

To achieve this, part of the compressed air output from the compressor is passed through a combi‐

nation of micro-filter and activated carbon filter.
The connection to air treated in this way is specially marked. It is designed as a quick-release cou‐

pling next to the outlet valves on the compressed air distributor.

Danger from toxic air!

Danger of respiratory arrest because the filter does not remove CO/CO

2

, methane or other

toxic gasses or vapors.
➤ Never use the machine in enclosed spaces, only in the open.
➤ Clean inlet air without hazardous contaminants. Engine exhaust must not be drawn into

the compressor!

The treated air does not meet the local standards for “Compressed air for breathing appara‐

tus'”. Therefore, it must not be used as pure breathing air but may be used to reinforce the

flow of fresh air when working in dusty or dirty conditions such as sand blasting.

Further information See chapter 2.7.1.1 for ambient conditions under which the fresh air filter can be used.

Further information See DIN EN 12021 for more information regarding permissible limit values for hazardous contami‐

nants in breathing air.

4

Design and Function

4.7

Options

No.: 9_9570 07 USE

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

47

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов