manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 290 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 290

5. Close and lock the access doors.
6. Lift and transport carefully.

Take care when setting down the machine

1.

 Incorrect setting down can damage the machine.

Machine components, particularly the chassis, can be damaged by incorrectly setting the ma‐

chine down.
➤ Set the machine down carefully.
➤ Do not set down unevenly.

2. Set the machine down slowly and carefully.

12.2.5  Option rb/rm/rt, rc/ro/rt, rw

Transport with a forklift truck

Precondition The machine is shut down.

All connecting lines and hoses disconnected and removed.

Damage to the machine by incorrect lifting with a fork truck.

The machine may fall or be damaged by the forks.
➤ Only machines equipped with a guide for forklift trucks or lifting lugs may be lifted with

the forklift.

➤ Do not use forklifts to lift towable machines.
➤ Do not use a fork lift on stationary machines with base frame (option rx).
➤ Pick up the machine only from the side with the forks through the lifting lugs.

Fig. 108 Transport with a forklift truck

1

Lifting lug (machine with skid chassis)

2

Guides for forklift truck (non-towable machine)

1. Close and lock the access doors or canopy.
2. Position the forklift truck to the side of the machine with the forks lined up with the lifting lugs/

guides.

12 Decommissioning, Storage and Transport

12.2 Transport

276

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Option rb/rm/rt, rc/ro/rt,

rw

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов