manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 137 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 137

Fig. 48 Bleeding the fuel system

1

Fuel pre-filter with integrated water trap

2

Bleed screw

3

Manual fuel pump

1. Place a receptacle beneath the water trap housing.
2. Open the bleed screw at the filter head.
3. Operate the fuel manual pump only until no more air bubbles appear in the fuel flowing from

the bleed screw.

4. Close the bleed screw at the filter head.
5. Turn on the «battery isolating switch».
6. Close the door.

Start the engine as soon as the fuel system has been bled and allow to run for at least 5 mi‐

nutes in IDLE.

7. Open the left-rear door.
8. Check the fuel water trap for leaks.

Fuel has escaped: Re-tighten filter cartridge and all screw connections.

9. Close the door.

10 Maintenance

10.4 Engine maintenance

No.: 9_9570 07 USE

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

123

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов