manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 289 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 289

Parking the machine (fixed-height chassis, without parking brake):

Fig. 107 Safety sign - secure the chocks

1.

 Machine without parking brake.

Serious injury or death can result from an unsecured machine rolling away.
➤ Securely chock the machine before uncoupling.
➤ As a general rule, the machine should always be blocked with chocks when it is not being

moved.

➤ The machine should not be manoeuvred by hand.

2. Use a coupled towing vehicle to move the machine into position.
3. Lower the jockey wheel until the towing mechanism is stress-free.
4. Place chocks under the wheels.
5. Remove the lighting and signaling system.
6. Uncouple the compressor from the towing vehicle:

■ Push the safety lever at the ball coupling and pull the coupling handle upward (see Ill. 95).
■ Lift the coupling off the towing hitch ball.

7. Slowly remove the towing vehicle from the parked machine.

12.2.4  Transport with a crane

Additional precautions for conditions of snow and ice

Considerable snow or ice may build up on the machine under low temperature conditions.

This may adversely effect the machine's center of gravity.

It is possible that the permissible loading on the crane or lifting eye is exceeded.
➤ Perform the following tasks in snow and ice conditions:

■ Remove any snow and ice from the machine before lifting by a crane.
■ Make sure the lifting eye cover plate is freely accessible and can be opened.

Perform the following tasks prior to transport by crane

A lifting eye is provided for transport with a crane. The lifting eye is located beneath a lift-up cover

in the center of the canopy.
1.

 The machine can be damaged by jerky lifting!

Components may break.
➤ Lift the machine carefully.

2. Unlock the cover from the inside by actuating the built-in hand lever and lift up.
3. Position the crane hook vertically over the lifting eye.
4. Engage the hook in the eye.

12 Decommissioning, Storage and Transport

12.2 Transport

No.: 9_9570 07 USE

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

275

Option rd/ro/rs

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов