manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 45 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 45

Item

Sign

Meaning

190*

max.

min.

Wrong cooling oil level.

Risk of machine defects or rising oil consumption (oil content for pure air).
➤ Check cooling-oil level.
➤ Run the machine only with proper cooling-oil level.

282*

Explosive hydrogen gas.

Severe injury or death could result from exploding gas.
➤ Keep flames, sparks and other sources of ignition away.

283*

Battery contains acid.

Severe injury result from contact with battery acid.
➤ Do not allow battery acid to contact eyes, skin, clothing or painted surfa‐

ces.

➤ Do not attempt to jump-start if battery fluid is frozen.
➤ Bring temperature of battery up to at least 60°F before attempting to

jump-start it may explode.

303*

Fire or explosion caused by refueling.

Severe injury or death result from inflaming fuel.
➤ Use diesel fuel only.
➤ NEVER attempt to refuel the compressor while it is operating.
➤ Always replace fuel filter cap after refueling.
➤ Always wipe up fuel spills which may occur inside the compressor enclo‐

sure and allow the machine to ventilate.

310
311

Injury or damage from open machine.
➤ Operate the machine only when closed.
➤ Transport the machine only when closed.

320*

Loud noise and oil mist when the safety relief valve opens.

Ear damage and burns can result.
➤ Wear ear protection and protective cloths.
➤ Close all maintenance doors and cover panels.
➤ Work carefully.

330
331
332

Hot surface can cause burns.
➤ Let the machine cool down.
➤ Work carefully.
➤ Wear protective cloths and gloves.

390*
391*

Rotating fan blades and V-belt drive

Injury and machine damage possible. Severe injury could result from touch‐

ing the fan blades and v-belt drive while it is rotating.
➤ Never switch the machine on without guard in place over the fan blade.
➤ Isolate completely from the power supply (all conductors) and ensure the

supply cannot be switched on again (lock off).

* Location within the machine

** Only towable machines

*** Only machines with Option dc

3

Safety and Responsibility

3.7

Safety signs

No.: 9_9570 07 USE

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

31

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов