manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 182 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 182

2. With the aid of a torch, check the brake lining thickness.

Brake linings of less than 0.1 inch thickness should be replaced by a specialised workshop.

3. Replace the plug in the inspection hole.

10.10.3.3 Brake system adjustment

There is an arrow pressed into the brake back plate near the adjustment hole.
■ Turning in the direction of the arrow increases brake force.
■ Turning in the opposite direction to the arrow releases brake force.

Fig. 80 Brake system adjustment

1

Brake rod

2

Equaliser

3

Brake support

4

Screwdriver as adjusting tool

5

Adjusting wheel

1. Remove the plug from the inspection hole.
2. Use a screwdriver to turn the adjusting wheel 

5

 until the wheels no longer turn in the forward

direction.

3. Apply the parking brake a number of times to centre the brake linings.
4. Use the screwdriver to turn the adjusting wheel back (3 to 5 notches) until there is no more

braking resistance to the wheels turning forward.

5. Pull on the parking brake.
6. Check the position of the equaliser 

2

 on the brake rod 

1

.

If the equaliser is perpendicular to the brake rod, the brake clearance is the same on each

wheel.
If the equaliser is oblique to the brake rod, adjust the brake rod.

7. Pull the parking brake lightly on and compare the braking force on the wheels.

If the braking force on the wheels is not equal, re-adjust brake system.

8. Replace the plug in the inspection hole.

A light rubbing sound when the wheels turn is permissible if it does not affect free turning.

10 Maintenance

10.10 Chassis maintenance

168

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов