manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 193 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 193

4. Switch the machine on and run it in IDLE mode for approx. 2 minutes.

The condensate collecting in the filter housings is blown out.

5. Shut down the machine.
6. Open both left-hand doors.
7. Close the drain valve.
8. Carefully remove the receptacle.
9. Close the doors.

Condensate must be stored in suitable containers and disposed of in accordance with local

environmental regulations.

10.11.3.2 Check the oil indicator

The fresh air filter is fitted with an oil indicator. When the indicator is blue, the filtration function can

no longer be ensured and the filter must not be used. Both filter elements and the oil indicator must

be changed (regardless of the maintenance schedule).
The oil indicator must be checked at least once daily.

The oil indicator does not give information on the filter element changing interval.

➤ Check the oil indicator.

Indicator is blue: Replace both filter el oil level indicator.

10.11.3.3 Changing consumable parts

The fresh air filter contains two different elements which must be changed as a pair. Note location!

Using the fresh air filter without installed filter elements is not permitted!
Handle new filter elements only with clean fabric gloves. Do not touch the new filter elements

with bare fingers – Contamination risk!

Material Spare parts

Filter wrench
Wrench
Cleaning cloths
Clean fabric gloves

Precondition The machine has cooled down.

The «battery isolating switch» is turned off.

Ensure the fresh air filter is de-pressurised:

➤ Open the fresh air filter drain tap to release any remaining pressure.

Change the lower filter element (high performance element)

1. Unscrew the lower housing counter-clockwise.
2. Draw the filter element down and out.
3. Clean the lower housing and sealing surface with a lint-free cloth.
4. Check the housing gasket.

Housing gasket is damaged: replace gasket.

10 Maintenance

10.11 Maintenance for Optional Items

No.: 9_9570 07 USE

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

179

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов