KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 288 | Manualshive

Страница: 288 / 426

KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 288

5. Lower the jockey wheel until the towing mechanism is stress-free.
6. Place chocks under the wheels.
7. Uncouple the compressor from the towing vehicle:

■ Open the towing coupling of the towing vehicle.
■ Slowly forward the towing vehicle to separate from the parked machine.

Parking the machine (height-adjustable chassis):

1. Use a coupled towing vehicle to move the machine into position.
2. Disconnect the lighting and signaling cable.
3. Strongly pull the parking brake upward past the dead point zone (see Ill.106, figure a).

The gas spring holds the brake under tension.

4. Detach the breakaway cable.
5. Lower the jockey wheel until the towing mechanism is stress-free.
6. Place chocks under the wheels.
7. Uncouple the compressor from the towing vehicle:

■ Push the safety lever at the ball coupling and pull the coupling handle upward (see Ill. 95).
■ Lift the coupling off the towing hitch ball.

8. Slowly remove the towing vehicle from the parked machine.

The gas spring automatically increases parking brake force if the machine rolls backwards or

when parked on a slope.

Parking the machine (fixed-height chassis):

1. Use a coupled towing vehicle to move the machine into position.
2. Disconnect the lighting and signaling cable.
3. Strongly pull the lever of the parking brake upward to the last ratchet tooth (see Ill. 106, figure

b).
When the hand brake lever is horizontal, the brake is under spring loading.
If the lever is not horizontal, the brake is not fully applied and the machine may roll away.

4. Detach the breakaway cable.
5. Lower the jockey wheel until the towing mechanism is stress-free.
6. Place chocks under the wheels.
7. Uncouple the compressor from the towing vehicle:

■ Push the safety lever at the ball coupling and pull the coupling handle upward (see Ill. 95).
■ Lift the coupling off the towing hitch ball.

8. Slowly remove the towing vehicle from the parked machine.

12 Decommissioning, Storage and Transport

12.2 Transport

274

Operator Manual Screw Compressor
M250 SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Option rb/rm/rs

Option rc/ro/rs

«
...
286
287
288
289
290
...
»

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов